中国机械工程学会生产工程分会知识服务平台 | sc.gmachineinfo.com

期刊

ISSN	0043-1648
刊名	Wear
参考译名	磨损
收藏年代	1997～2024

全部

1997	1998	1999	2000	2001	2002
2003	2004	2005	2006	2007	2008
2009	2010	2011	2012	2013	2014
2015	2016	2017	2018	2019	2020
2021	2022	2023	2024

2017, vol.370/371	2017, vol.372/373	2017, vol.374/375	2017, vol.376/377, no.Pt.A	2017, vol.376/377, no.Pt.B	2017, vol.378/379
2017, vol.380/381	2017, vol.382/383	2017, vol.384/385	2017, vol.386/387	2017, vol.388/389	2017, vol.390/391
2017, vol.392/393

题名

作者

出版年

年卷期

Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp composites

Lopez, A. J.; Otero, E.; Rams, J.; Garcia-Rodriguez, S.; Torres, B.; Maroto, A.

2017

2017, vol.390/391

Modeling of normal force and finishing torque considering shearing and ploughing effects in ultrasonic assisted magnetic abrasive finishing process with sintered magnetic abrasive powder

Shukla, Vipin C.; Pandey, Pulak M.; Dixit, Uday S.; Roy, Anish; Silberschmidt, Vadim

2017

2017, vol.390/391

Reproduction of white etching cracks under rolling contact loading on thrust bearing and two-disc test rigs

Guzman, F. Gutierrez; Oezel, M.; Jacobs, G.; Burghardt, G.; Broeckmann, C.; Janitzky, T.

2017

2017, vol.390/391

Fatigue and surface spalling of cemented carbides under cyclic impact loading - Evaluation of the mechanical properties with respect to microstructural processes

Kuepferle, Jakob; Roettger, Arne; Theisen, Werner

2017

2017, vol.390/391

Identification of parameters influencing the glaze layer formation and stability at high temperature for a Waspaloy/Rene125 contact under fretting wear conditions

Alkelae, F.; Fouvry, S.

2017

2017, vol.390/391

New assessment criteria for durability evaluation of highly repellent surfaces

Wojdyla, Anna; Taylor, Alan; Durand, Geraldine; Boyd, Ian W.

2017

2017, vol.390/391

Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms

Marques, Flavio Parreiras; Bozzi, Antonio Cesar; Scandian, Cherlio; Tschiptschin, Andre Paulo

2017

2017, vol.390/391

Wear resistance of injection moulded PLA-talc engineered bio-composites: Effect of material design, thermal history and shear stresses during melt processing

Puopolo, M.; Vesco, S.; Aversa, C.; Barletta, M.; Pizzi, E.

2017

2017, vol.390/391

Characterization of damage and triboparticles resulting from fretting of Incoloy 800 steam generator tubes against different materials

Soria, S. R.; Tolley, A.; Yawny, A.

2017

2017, vol.390/391

Delamination and longitudinal cracking in multi-layered composite nanostructured coatings and their influence on cutting tool life

Vereschaka, A. A.; Grigoriev, S. N.; Sitnikov, N. N.; Batako, A. D.

2017

2017, vol.390/391