中国机械工程学会生产工程分会知识服务平台

期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998~2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2020, vol.106, no.1/2 2020, vol.106, no.11/12 2020, vol.106, no.3/4 2020, vol.106, no.5/6 2020, vol.106, no.7/8 2020, vol.106, no.9/10
2020, vol.107, no.1/2 2020, vol.107, no.11/12 2020, vol.107, no.3/4 2020, vol.107, no.5/6 2020, vol.107, no.7/8 2020, vol.107, no.9/10
2020, vol.108, no.1/2 2020, vol.108, no.11/12 2020, vol.108, no.3 2020, vol.108, no.4 2020, vol.108, no.5/6 2020, vol.108, no.7/8
2020, vol.108, no.9/10 2020, vol.109, no.1/2 2020, vol.109, no.3/4 2020, vol.109, no.5/6 2020, vol.109, no.7/8 2020, vol.109, no.9/12
2020, vol.110, no.1/2 2020, vol.110, no.11/12 2020, vol.110, no.3/4 2020, vol.110, no.5/6 2020, vol.110, no.7/8 2020, vol.110, no.9/10
2020, vol.111, no.1/2 2020, vol.111, no.11/12 2020, vol.111, no.3/4 2020, vol.111, no.5/6 2020, vol.111, no.7/8 2020, vol.111, no.9/10

题名作者出版年年卷期
Five-axis flank milling stability prediction by considering the tool-workpiece interactions and speed effect (vol 71, pg 613, 2020)Ji, Yongjian; Wang, Xibin; Liu, Zhibing; Wang, Hongjun; Feng, Wei; Wang, Yong; Liu, Shuyao20202020, vol.108, no.7/8
Comparative experimental and numerical study on the mechanical properties, formability, and microstructure of two high strength steel sheetsEslami-Farsani, R.; Hasanniya, M. H.; Basaeri, M. A.; Khorsand, H.20202020, vol.108, no.7/8
Cross-directional feed rate optimization using tool-path surfaceLee, Chen-Han; Yang, Fangzhao; Zhou, Huicheng; Hu, Pengcheng; Min, Kang20202020, vol.108, no.7/8
Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored propertiesCoors, Timm; Pape, Florian; Kruse, Jens; Blohm, Thoms; Beermann, Ruediger; Quentin, Lorenz; Herbst, Sebastian; Langner, Jan; Stonis, Malte; Kaestner, Markus; Reithmeier, Eduard; Nuernberger, Florian; Poll, Gerhard20202020, vol.108, no.7/8
Optimizing the numerical algorithm in Fast Constant Engagement Offsetting Method for generating 2.5D milling tool pathsJacso, Adam; Szalay, Tibor20202020, vol.108, no.7/8
Five-axis flank milling stability prediction by considering the tool-workpiece interactions and speed effectJi, Yongjian; Wang, Xibin; Liu, Zhibing; Wang, Hongjun; Feng, Wei; Wang, Yong; Liu, Shuyao20202020, vol.108, no.7/8
Structural analysis and densification study of the mechanically alloyed Cr(50)Ni(50)powdersDekhil, L.; Hanneche, N.; Fellah, M.; Bououdina, M.; Mercier, A. M.20202020, vol.108, no.7/8
A short review on selective laser melting of H13 steelWang, Jintao; Liu, Shouping; Fan, Yunpeng; He, Zhongrui20202020, vol.108, no.7/8
Experimental study on fabricating ball micro end mill with spiral blades by low speed wire electrical discharge machiningGong, Siqian; Meng, Fantao; Sun, Yao; Su, Zhipeng; Jin, Liya20202020, vol.108, no.7/8
Comparative experimental and numerical study on the mechanical properties, formability, and microstructure of two high strength steel sheets (vol 17, pg 531, 2020)Basaeri, Ali; Khorsand, H.; Eslami-Farsani, R.; Hasanniya, M. H.20202020, vol.108, no.7/8
123456