中国机械工程学会生产工程分会知识服务平台

期刊


ISSN0898-1507
刊名Lasers in engineering
参考译名工程激光
收藏年代2002~2024



全部

2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2013
2014 2015 2016 2017 2018 2019
2020 2021 2022 2023 2024

2022, vol.51, no.1/5 2022, vol.51, no.6 2022, vol.52, no.1/3 2022, vol.52, no.4/6 2022, vol.53, no.1/2 2022, vol.53, no.3/4
2022, vol.53, no.5/6

题名作者出版年年卷期
Fabrication of Crack-free Glass Microfluidic Chips with Tape-assisted Laser EngravingSun, L-L; Yang, X.; Ding, A.; Zhang, B-Y; Yin, Z-F20222022, vol.52, no.4/6
Laser and Laser-Liquid Composite Etching of Si WafersLi, X.; Chen, Y-L; Si, X-D; Li, H-G; Chen, X-H20222022, vol.52, no.4/6
A Novel Radio Frequency Identification (RFID) Dynamic Performance Measurement System Based on Laser Ranging and Humidity ControlLiu, Z-L; Yu, X-L; Zhu, Z.; Zhuang, X.; Zhao, Z-M; Li, L.20222022, vol.52, no.4/6
Analysis of Powder Feeding Behaviour in Coaxial Laser CladdingCui, Y. H.; Wu, L. L.; Yang, Y. C.; Lan, Y. C.; Lin, J. L.; Fang, N. W.; Chen, X. Y.; Li, R.20222022, vol.52, no.4/6
Investigation of Six Contamination Parameters Via a Two-dimensional (2-D) Photonic Structure (PhC) Using an Infrared (IR) Laser BeamKumar, B. A.; Sahu, S. K.; Palai, G.20222022, vol.52, no.4/6
Describing the Influence of Laser Cutting Parameters on a SiC Reinforced Al Alloy Metal Matrix Composite (MMC) Using Response Surface Methodology (RSM)Shajahan, C. M.; Kuriachen, B.; Lalhmingsanga, H.20222022, vol.52, no.4/6
Research State-of-the-Art on Controlling Ti-Al Intermetallic Compound (IMC) Formation During the Laser Beam Welding (LBW) of Ti and Al AlloysYu, D-S; Zhou, J-P; Zhang, Y.20222022, vol.52, no.4/6
Morphology Control and Process Optimization for the Laser Cladding of Ni60 Alloy onto H13 SteelXue, S-L; Yao, F-P; An, X-J; Jin, J-B; Li, J-H20222022, vol.52, no.4/6
Effect of Nb Content on the Microstructure and Mechanical Properties of a Stellite 20 Laser Clad onto Cast SteelGu, X-Y; Gong, H. T.; Song, Y-J; Gu, X-P; Li, H-M; Zhao, X-H; Liu, L.20222022, vol.52, no.4/6
Deformation Behaviour of Open-cell AlSi10Mg Alloy Formed By Selective Laser Melting (SLM)Bai, P-K; Yang, X.; Wang, J.; Du, W-B; Zhao, Z-Y; Wang, W-X20222022, vol.52, no.4/6
12