中国机械工程学会生产工程分会知识服务平台

期刊


ISSN0043-1648
刊名Wear
参考译名磨损
收藏年代1997～2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2006 2007 2008
2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023 2024

2024, vol.536/537 2024, vol.538/539 2024, vol.552/553

题名作者出版年年卷期
Phase alteration in Zr, Nb, Mo-doped Fe2Ni2CrV0.5 high-entropy alloy for mechanical performance regulation: A parallel comparison of tribological behavior against GCr15 counterpartLiu H.; Gao Q.; Liu X.; Yang H.; Li J.; Chen P.; Li Y.20242024, vol.552/553
Effect of temperature on the tribological behavior of additively manufactured tool materials in reciprocating sliding against cemented carbideMacedo G.; Pelcastre L.; Prakash B.; Hardell J.20242024, vol.552/553
Influence of stratified tribologically transformed structure layers on contact fatigue crack initiation of bainitic rail steelLiu M.; Gao G.; Fan Y.; Liu Z.; Gui X.; Yang Z.20242024, vol.552/553
Unveiling an additively manufactured open hardware pin-on-disc tribometer considering its high reproducibilityOrgeldinger C.; Rosnitschek T.; Tremmel S.20242024, vol.552/553
Effect of forward and reverse cutting on tool wear behavior in ultrasonic vibration-assisted milling of 3D needle-punched C/SiC compositesChen G.; Han Z.; Wang J.; Xu J.; Yu H.; Ren L.20242024, vol.552/553
Microstructure, property and high-temperature wear performance of Cr3C2-based coatings deposited by conventional and ID-HVAF spray torches: A comparative studyAlroy R.J.; Sivakumar G.; Kamaraj M.20242024, vol.552/553
Fabrication of gradient structure for enhancing wear resistance of GCr15 bearing steel friction shimXiao J.; Li D.; Zhou Y.; Xie X.; Liu X.20242024, vol.552/553
Wear study of additively manufactured repair material for R260 grade railsRodriguez-Arana B.; Lopez-Lopez J.; Schiopetto F.; San Emeterio A.; Perez-Casero I.; Veiga A.; Ausejo S.; Salas Vicente F.20242024, vol.552/553
The effect of MoS2 concentration on the thickness and tribology performance of electro-codeposited Ni–Cr–MoS2 coatingsLi Z.; Han X.; Shan Y.; Xu J.; Shen Y.20242024, vol.552/553
Analysis of tool wear and cutting characteristics in milling of powder metallurgy nickel-based superalloy by various coatingsWang D.; Liu Z.; Zhang X.; Zhang K.; Dang J.; Tu L.; Wang Q.; Ming W.; Chen M.20242024, vol.552/553
123456789



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024