中国机械工程学会生产工程分会知识服务平台

期刊


ISSN0954-4097
刊名Proceedings of the Institution of Mechanical Engineers
参考译名机械工程师学会会报F辑:铁路与快速运输杂志
收藏年代1995~2023



全部

1995 1996 1997 1998 1999 2000
2001 2002 2003 2004 2005 2006
2007 2008 2009 2010 2012 2013
2014 2015 2016 2017 2018 2019
2020 2021 2022 2023

2014, vol.228, no.1 2014, vol.228, no.2 2014, vol.228, no.3 2014, vol.228, no.4 2014, vol.228, no.5 2014, vol.228, no.6
2014, vol.228, no.7 2014, vol.228, no.8

题名作者出版年年卷期
Full-scale measurement and analysis of train slipstreams and wakes. Part I: Ensemble averagesChris J. Baker; Andrew Quinn; Mikael Sima; Lars Hoefener; Ricardo Licciardello20142014, vol.228, no.5
Full-scale measurement and analysis of train slipstreams and wakes. Part 2: Gust analysisChris J. Baker; Andrew Quinn; Mikael Sima; Lars Hoefener; Ricardo Licciardello20142014, vol.228, no.5
Development of effective performance measures for wayside rail curve lubrication in heavy haul linesMd Gyas Uddin; Gopi Chattopadhyay; Mohammad Rasul20142014, vol.228, no.5
Evaluation of track geometry maintenance for a heavy haul railroad in Sweden: A case studyIman Arasteh Khouy; Hakan Schunnesson; Ulla Juntti; Arne Nissen; Per-Olof Larsson-Kraik20142014, vol.228, no.5
Power harvesting systems design for railroad safetyAbolfazl Pourghodrat; Carl A. Nelson; Sean E. Hansen; Vedvyas Kamarajugadda; Stephen R. Platt20142014, vol.228, no.5
Influence of system parameters on the stability limit of the undisturbed motion of a motor bogieCaihong Huang; Jing Zeng; Shulin Liang20142014, vol.228, no.5
Large eddy simulation of the flow around a train passing a stationary freight wagonYebo Liu; Hassan Hemida; Zhiming Liu20142014, vol.228, no.5
Optimisation of track geometry inspection intervalIman Arasteh Khouy; Per-Olof Larsson-Kraik; Arne Nissen; Ulla Juntti; Hakan Schunnesson20142014, vol.228, no.5
Overview of issues and research related to special trackwork for shared high-speed-rail passenger and heavy-axle-load freight operationsChristopher T. Rapp; Ryan G. Kernes; Mohd Rapik Saat20142014, vol.228, no.5