中国机械工程学会生产工程分会知识服务平台

期刊


ISSN1355-2546
刊名Rapid prototyping journal
参考译名快速样机成型杂志
收藏年代1999～2023



全部

1999 2000 2001 2002 2003 2004
2005 2006 2007 2008 2009 2010
2011 2012 2013 2014 2015 2016
2017 2018 2019 2020 2021 2022
2023

2023, vol.29, no.1 2023, vol.29, no.10 2023, vol.29, no.2 2023, vol.29, no.3 2023, vol.29, no.4 2023, vol.29, no.5
2023, vol.29, no.6 2023, vol.29, no.7 2023, vol.29, no.8 2023, vol.29, no.9

题名作者出版年年卷期
Ti6Al4V scaffolds fabricated by laser powder bed fusion with hybrid volumetric energy densityGaur, Bhanupratap; Soman, Deepak; Ghyar, Rupesh; Bhallamudi, Ravi20232023, vol.29, no.1
A study on the effects of internal architecture on the mechanical properties and mixed-mode fracture behavior of 3D printed CaCO3/ABS nanocomposite samplesSeyedzavvar, Mirsadegh; Boga, Cem20232023, vol.29, no.1
Viability and development of multi-axis material extrusion products: a case studyKaill, Nathaniel; Campbell, Robert; Pradel, Patrick20232023, vol.29, no.1
Effect of direct aging and annealing on the microstructure and mechanical properties of AlSi10Mg fabricated by selective laser meltingXiao, Haifeng; Zhang, Changchun; Zhu, Haihong20232023, vol.29, no.1
Investigation of the effects of a pre-deposition heating system on the interfacial temperature and interlayer bonding strength for fused filament fabricationMundada, Piyush Suresh; Yang, Che-Hao; Chen, Roland K.20232023, vol.29, no.1
Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraintsEttaieb, Kamel; Godineau, Kevin; Lavernhe, Sylvain; Tournier, Christophe20232023, vol.29, no.1
Assessment and treatment of pectus deformities: a review of reverse engineering and 3D printing techniquesMussi, Elisa; Servi, Michaela; Facchini, Flavio; Furferi, Rocco; Volpe, Yary20232023, vol.29, no.1
Additively manufactured foamed polylactic acid for lightweight structuresKanani, Armin Yousefi; Rennie, Allan E. W.; Bin Abd Rahim, Shayfull Zamree20232023, vol.29, no.1
An initial feasibility study into ray-based slicing for revolving thin-wall parts using a rotary 3D printerZhao, Donghua; Zhu, Gaohan; He, Jiapeng; Guo, Weizhong20232023, vol.29, no.1
Overcoming the post-processing barriers for 3D-printed medical modelsVerma, Virendra Kumar; Kamble, Sachin S.; Ganapathy, L.; Tarei, Pradeep Kumar20232023, vol.29, no.1
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024