中国机械工程学会生产工程分会知识服务平台

期刊


ISSN0898-1507
刊名Lasers in engineering
参考译名工程激光
收藏年代2002～2023



全部

2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2013
2014 2015 2016 2017 2018 2019
2020 2021 2022 2023

2020, vol.45, no.1/3 2020, vol.45, no.4/6 2020, vol.46, no.1/4 2020, vol.46, no.5/6 2020, vol.47, no.1/3 2020, vol.47, no.4/6

题名作者出版年年卷期
Optimization of Radio-frequency Identification (RFID) Multi-tag Topology Based on Laser Ranging and Mind Evolutionary Algorithm (MEA)Li, L.; Yu, X-L; Zhuang, X.; Zhao, Z-M; Zhu, X-Y; Liu, Z-L; Dong, D-B20202020, vol.45, no.1/3
Effects of Cutting Angle on Multiple Quality Characteristics for the Microcutting of Thin 316L Stainless Steel Using a Low Power Fiber LaserPramanik, D.; Kuar, A. S.; Sarkar, S.; Mitra, S.20202020, vol.45, no.1/3
Optimization of Laser and Electrochemical Process Parameters for Surface Modification of Hardness and Hydrophobicity on 316L SteelThanigaivelan, R.; Arunachalam, R. M.; Nithish, A.; Venkatesh, S.; Naveenkumar, P.; Selvaganapathy, S.; Aravind, A. R. Siranjeevi20202020, vol.45, no.1/3
Characterization and Friction Wear Performance of Laser Thermal Sprayed Co30Cr8W1.6C3Ni1.4Si Coatings on TC4 Titanium AlloyXu, J-Y; Kong, D-J20202020, vol.45, no.1/3
A Novel Flatness Detection Method for Spiral Bevel Gears in an Automobile GearboxFu, X. B.; Zhang, G. R.; Zhang, Y. C.; Li, Y. B.; Jia, L. S.; Guan, Y.20202020, vol.45, no.1/3
Investigation of Parametric Influences During the Cutting of Contours in 6061-T6 Aluminium Alloy Sheet Using a Pulsed Nd:YAG LaserJoshi, P.; Sharma, A.20202020, vol.45, no.1/3
Effect of Laser Shock Peening on Fatigue Fracture Behaviour of Laser Welded Butt Joints With Different Surface ConditionsCao, Z-W; Yang, J.; Lu, W.; Wang, B.20202020, vol.45, no.1/3
Real Time Measurement of Subgrade Settlement in High Speed Railways with a Resolution of 0.25 mm Using a Laser Imaging MethodYang, S.; Yang, Y-Y; Zhang, L.; Huang, J-Y; Bai, Y-R; Lin, X-C20202020, vol.45, no.1/3
The Influence of Technological Parameters on the Interface Performance of Laser Welded Sodium Calcium Vacuum Plate GlazesMiao, H.; Li, C.; Zhang, S.; He, Q.; Zhang, Y.; Liu, S.20202020, vol.45, no.1/3
Experimental Investigation and Parameter Optimization of Low Power CO2 Laser Cutting of a Carbon/Kevlar Fibre-reinforced Hybrid CompositeMoghadasi, K.; Tamrin, K. F.20202020, vol.45, no.1/3
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024